ProjectProponent: Alcoa World Alumina AustraliaProposal description: The proposal is to install improved pollution control equipment on the Liquor Burner at Kwinana in order to reduce emissions. The existing pollution control equipment on the Liquor Burner consists of a primary and secondary cyclone with water scrubbing. The proposed pollution control equipment consists of a primary cyclone, filter, wet scrubber and a regenerative thermal oxidiser (RTO). The stack height would also be increased. Alcoa predicts the proposed equipment will result in reductions of Volatile Organic Compound (VOC) emissions of between 81 and 98 per cent. Assessment Number: 1548Region: PerthReferred under EP Act: s38Industry sector: IndustrialInfrastructureLast updated: June 23, 2005Current Status: Ministerial Statement published 1. ReferralReferral documentation: Environmental Referral Document (PDF, 3.07 MB) Appendix - Air dispersion modelling (PDF, 1.11 MB) Appendix - CSIRO Review of ‘Kwinana Liquor Burner – Air Dispersion Modelling’ (PDF, 217.01 KB) Appendix - Atmospheric emissions screening assessment (PDF, 806.59 KB) Appendix - Peer review of the Atmospheric emissions screening assessment (PDF, 433.94 KB) Appendix - Stakeholder Reference Group updates (PDF, 1.57 MB) 2. Decision on whether to assess this proposalChair's Determination: Assessment on referral information (ARI)Date published: Monday, 31 January, 2005 4. EPA Report on assessmentEPA Report Number: 1163EPA Report: Kwinana Liquor Burner – Emissions Reduction Project (PDF, 159.42 KB)Key Environmental Factors: AirAir QualityDate published: Monday, 31 January, 2005Appeals close: Monday, 14 February, 2005 5. Decision on proposal and implementation of proposalMinisterial StatementDate of approval: Thursday, 23 June, 2005Ministerial Statement: Ministerial Statement 678 (PDF, 768.67 KB)